8:00 – 2:00 VISIBILITY

• Deployed Dong’s new swf, which did fix the financial load problem!
• Demo’d to Trish, notes are below. Next demo is Friday afternoon
  • Project
    • Save Project Error
      • Code: Server Processing
      • Message Out of bounds Exception – Index 9, size 9
    • Services are not getting checked when project is loaded
    • Add “other” service check box with an Addable dropdown to list of services
    • Change DHS to USCG
  • Funding Request
    • Combine valuation and save. They really don’t need to be different buttons
    • Save funding req gives out of bounds error
    • Change all “BF 34” to “BF 5”
    • BF panel should have the following fields
      • Acceptance Date
      • Submit Date
      • Certified Date
      • Document Number
      • Reimbursable (Tab? Grouping?)
        • Amount
      • Direct Cite (Tab? Grouping?)
        • Obligation Amount
        • Obligation Date
        • Contract #
        • Contract Date
  • Enter Financial Data
    • “Planned Obligation” is blanked when saving data on other lines and window automatically un-maximizes
    • Percentages are not being calculated on some charts. THes seems to be the case when Goals are not showing
    • Un-maximize seems to happen on saves of data
  • Next meeting is Friday afternoon, time is TBD

2:00 – 4:00 – FP

• Working on framework
• 

7:30 – 10:30, 2:30 – 4:00 VISIBILITY

• Swung by the site to check on things. All is running. Deleted some unused tables and checked on usage
• Work with Dong today to finalize PPM for Wednesday demo
• Switched all my passwords everywhere. Here’s hoping things will still be working tomorrow…
• Discussing our need for a server with Rick Hally

10:30 – 2:30 FP

• Built a linkage to have reaction motions work independently from the input forces
• And that works. What this means is that for the system to work, there needs to be a “perceptual(?)” reference that the opposing motion can move relative to. So the prototype with the holes in it for actuators is actually close to what it should be.
• Important thing to note – the kf motor should be connected to the reference structure so that the forces coming back from the kf device aren’t modifying the input forces. The test setup is adding these kind of artifacts.
• Ordered threaded rod (93250A026), nuts (94804A325), and rod ends (60645K441) from mcmaster ($58.34)
• Ordered two 12v/2A power supplies, a Servo Motor Controller and two 30mm linear actuators from Phidgets ($341.50 CAD)
• 

7:30 – 10:00 VISIBILITY

• Deployed VISIBILITY with fixed slideshow and resolution check
• Going to make the resolution check a method in EdgeUtils.Utils – Done
• Updated vis2, IngestManager, and VisibilityScripting with the warning. AccountManagers doesn’t need it.

10:00 – 2:00 FP

• Went looking for a 3D math library and found this: http://cmldev.net. Giving it a shot. Took a bit of time to find out where the properties are set to include an external library. If you right-click on the project and select properties, it’s in “Configuration Properties->C/C++->General”. Click on the “Additional Include Directories” In the case of cml, you need to point to the cml folder to get the paths working correctly in the code (i.e. <cml/cml.h>) Nope, the documentation sucks.
• Rolled my own simple vector functions. Collision detect now works. Next, collision response.

7:30 – 1:30 VISIBILITY

• Pat still isn’t pleased with VISIBILITY. Too much resizing of things. We reset her display from 1024×768 to 1280×1024. We’ll see if this helps
• Found some bugs with slideshows
  • This isn’t really a bug, but the individual and group dashboard windows should be labled
  • If you delete the only dashboard, you can’t drag new items into the target, and you get an exception
  • If you delete one of two dashboards, you get the same behavior, but no errors.
  • Mike has fixed all. Bringing in a new version, also with a screen resolution alert
• Showed JW and AG the slideshow capability. Anne, liked it quite a bit.

1:30 – 4:30 FP

• Added a PhysicsController
• Added PointMass objects
• Changed the graphics so we have colored balls, which will more match the PointMass objects
• Got the graphics following the strain gauge input on both paddles
• Next, calculate collision, and use that to set the motor offsets.

7:30 -10:30 (VISIBILITY)

• Checked out status of VISIBILITY. all seems to be working well
• Quick status with JM
• Set up a meeting with Anne to show here the new slideshow capability for tomorrow. She thinks we might have funding for a new project?
• Viz-n is ungodly slow today and is not allowing ssh connections. Starting the process of setting up a VPS on steadfast.net. Asking for the “Nickel – Debian 5” package (25 GB of Disk Space, 400 GB of Monthly Data Transfer, Fair Share CPU, 384 MB – Guaranteed RAM, Fully Managed, $44.95 per month | FREE Setup)

10:30 – 4:00

• Starting some actual kinetic feedback algorithms!
• No, I’m not. The DataDictionary is based around char* for the key. If the pointer goes out of scope, the content is lost. Fixing it so that it works with string.
• Got the dictionary fixed. Working on integrating with the graphics. Need to build a physics controller