start: 9:00

• Powered everything up.  No smoke
• Sensors working but no sounds coming out on “contact.”
• Attached headphones and found that the midi was working properly so it is probably a problem with the amplifier.
• Eventually got to a point where the peak light on the large amplifiers was lighting up.  Looked at the speakers and found out I used the wrong wires on one end.
• Once fixed sound worked.  Although the vibration goes through the whole unit, the finger that the speakers has strong enough vibrations that you don’t notice the other fingers vibrating as much.
• Fixed the analog inputs so 0 is the thumb and 4 is the pinky.
• Got the second finger working on that rheostat.  Currently both fingers are playing the same sound because the pan functions not working right.  Also there’s a direct connection to the i2c controller so I am still not sure if the bus will work properly.
• Forgot my phone today so pictures will be included on Mondays entry.
• All testing has been done using my old sketch so I still have to work out the problem with the simulation to get all the fingers working at the same time.

end 6:00